? rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 1 of 5 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2024B-111504 electrical characteristics characteristic sym notes min typ max units nominal center frequency f c 1 467.751 mhz passband minimum insertion loss il 18 20 db 1.5 db passband bw 1.5 1, 2 14.2 mhz 3 db passband bw 3 15 amplitude ripple from fc-6.344 mhz to fc-4.2985 mhz (-20 to 85c) 1 db p-p amplitude ripple from fc-6.344 mhz to fc-4.2985 mhz (-40 to -20c) 1.25 amplitude ripple from fc-4.4865 mhz to fc-2.441 mhz 1 amplitude ripple from fc-2.629 mhz to fc+0.069 mhz 1 amplitude ripple from fc-0.069 mhz to fc+2.629 mhz 1 amplitude ripple from fc+2.441 mhz to fc+4.4865 mhz 1 amplitude ripple from fc+4.2985 mhz to fc+6.344 mhz (-40 to 50c) 1 amplitude ripple from fc+4.2985 mhz to fc+6.344 mhz (50 to 85c) 1.25 group delay variation over fc-6.344 mhz to fc-2.441 mhz gdv1 60 80 ns p-p and from fc+6.344 mhz to fc+2.441 mhz group delay variation over fc2.629 mhz gdv2 60 120 rejection fc-33 to fc-12 mhz and fc+12 to fc+33 mhz 1, 2, 3 32 40 db fc-12 to fc-10.5 mhz 24 40 fc+9 to fc+12 mhz 10 24 operating temperature range t a 1 -40 +85 c differential input and output impedance 150 ohms case style 6 smp-03 7 x 5 mm nominal footprint lid symbolization (yy=year, ww=week, s=shift) see note 4 rfm SF2024B yywws smp-03 ? designed for sdars receiver if application ? low insertion loss ? 5.0 x 7.0 mm surface-mount case ? differential input and output ? complies with directive 2002/95/ec (rohs) absolute maximum ratings rating value units maximum incident power in passband +10 dbm max. dc voltage between any 2 terminals 30 vdc storage temperature range -40 to +85 c suitable for lead-free soldering - max soldering profile 260c for 30 s 467.751 mhz saw filter SF2024B connection terminals port 1 hot 10 port 1 ground return 1 port 2 hot 5 port 2 ground return 6 case ground all others electrical connections pb notes: 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 w and measured with 50 w network analyzer. 2. unless noted otherwise, all frequency specifications are referenced to the nom- inal center frequency, fc. 3. rejection is measured as attenuation below the minimum il point in the pass- band. rejection in final user application is dependent on pcb layout and exter- nal impedance matching design. see application note no. 42 for details. 4. "lrip" or "l" after the part number indicates "low rate initial production" and "eng" or "e" indicates "engineering prototypes." 5. the design, manufacturing process, and specifications of this filter are subject to change. 6. tape and reel standard per ansi / eia 481. 7. either port 1 or port 2 may be used for either input or output in the design. however, impedances and impedance matching may vary between port 1 and port 2, so that the filter must always be installed in one direction per the circuit design. 8. us and international patents may apply. 9. rfm, stylized rfm logo, and rf monolithics, inc. are registered trademarks of rf monolithics, inc. 10. ?copyright 1999, rf monolithics inc.
467.751 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 2 of 5 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2024B-111504 ch1 s11 1 u fs centr 467 . 751 mhz span 40 . 000 mhz cor hld prm ch2 s21 log 10 db/ ref 10 db center 467 . 751 000 mhz span 40 . 000 000 mhz cor hld prm ch3 s22 1 u fs centr 467 . 751 mhz span 40 . 000 mhz hld 1 oct 2003 16:31:31 1 1 : 53 . 094 5 . 4805 1 . 8648 nh 467 . 751 000 mhz 1 2 3 4 1 : 0 . 0000 db 0 . 000 000 mhz ref=1 ch2 markers bw : 14 . 012966 cent : 467 . 608187 q : 33 1_ loss : -19 . 249 1 1 : 62 . 180 -666 . 02 m 510 . 88 pf 467 . 751 000 mhz
467.751 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 3 of 5 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2024B-111504 ch1 s21 del 20 ns/ ref 740 ns ch1 center 467 . 751 000 mhz span 14 . 000 000 mhz c smo prm ch2 s21 log 1 db/ ref -16.76 db ch2 center 467 . 751 000 mhz span 15 . 000 000 mhz c prm 1 oct 2003 16:35:26 1 2 3 4 1 : 0 . 0000 db 0 . 000 000 mhz ref=1 ch2 markers bw : 14 . 015099 cent : 467 . 611486 q : 33 1_ loss : -19 . 226 . 1_ loss : -19 . 226
467.751 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 4 of 5 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2024B-111504 smp-03 case recommended pcb footprint case dimensions dimension mm inches min nom max min nom max a 6.80 7.00 7.20 0.268 0.276 0.283 b 4.80 5.00 5.20 0.189 0.197 0.205 c 1.65 2.00 0.065 0.079 d .47 0.60 .73 0.019 0.024 0.029 e 2.41 2.54 2.67 0.095 0.100 0.105 h 0.87 1.0 1.13 0.034 0.039 0.044 j 4.87 5.00 5.13 0.192 0.197 0.202 k 2.87 3.00 3.13 0.113 0.118 0.123 p 1.14 1.27 1.40 0.045 0.050 0.055 materials solder pad termination au plating 30 - 60 uinches (76.2-152 um) over 80- 200 uinches (203-508 um) ni. lid fe-ni-co alloy electroless nickel plate (8-11% phosphorus) 100-200 uinches thick body al 2 o 3 ceramic pb free electricalconnections connection terminals port 1 input or return 10 return or input 1 port 2 output or return 5 return or output 6 ground all others single ended operation return is ground differential operation return is hot a b c h e p d h j k 10-terminal ceramic surface-mount case 7 x 5 mm nominal footprint
467.751 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 5 of 5 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2024B-111504 tape and reel specifications ?b ? nominal size quantity per reel inches millimeters 7 178 500 13 330 2000 user direction of feed component orientation and dimensions carrier tape dimensions ao 5.5 mm bo 7.5 mm ko 2.0 mm pitch 8.0 mm w 16.0 mm pin #1 see detail "a" 13.0 20.2 2.0 12.0 100 ref. "b" ref. 16.0
|
